Product transportation and storage
★ The product is not allowed to tip over or suffer severe vibration.
★ When lifting the product after unpacking, the angle between the two steel wire ropes should be ≤120°. For example, using a forklift, roller or crowbar is not allowed to be carried out directly on the chassis of the product.
★ If the product needs to move a small distance when installed in place, you can pry it on the four corners of the chassis.
★ Do not disassemble electrical components and parts at will inside the product.
★ It should be protected from rain and moisture. The ambient temperature depends on the usage conditions.
Ordering Information
★ The user should provide the following information when ordering.
★ Main circuit scheme and combination arrangement
★ Auxiliary circuit control and wiring principle
★ Layout of the switchgear in the distribution room
★ Incoming and outgoing wires and interface requirements
★ Detailed models and specifications of the components installed in the cabinet.
★ Switchgear surface treatment and colour
★ Other special requirements (if any)